Skip to content

Products

Induction Melting, Heating and Vacuum Equipment

Five equipment families covering the full induction chain. Every machine is built to your alloy, output and grid voltage — the model tables below are starting points, not fixed catalogue items.

Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product direction; final configuration is confirmed against the project brief.

Melting Furnaces

Coreless induction melting furnaces for steel, iron, copper and aluminium — steel-shell, aluminium-shell and dual-track, with hydraulic 95° tilting.

7 structures →

Illustrative product concept of a medium-frequency induction power supply cabinet

Illustrative product direction; final configuration is confirmed against the project brief.

Medium Frequency Power Supplies

KGPS thyristor parallel-resonance and IGBT series-resonance inverters from 100 kW to 2,500 kW, with constant-power tracking and full protection. Larger ratings built to order.

3 structures →

Illustrative product concept of an automated billet induction heating line

Illustrative product direction; final configuration is confirmed against the project brief.

Induction Heating Systems

Through-heating and surface-hardening lines for billets, bars, tubes and finished parts, with closed-loop temperature control and automatic handling.

3 structures →

Induction heat-treatment production cell with a shaft hardening station, controlled quench area and continuous tempering line

Illustrative product direction; final configuration is confirmed against the project brief.

Induction Heat Treatment Systems

CNC induction hardening cells and continuous quenching and tempering lines, configured around the component, steel grade, treatment zones and production flow.

2 structures →

Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product direction; final configuration is confirmed against the project brief.

Vacuum Furnaces

Vacuum and controlled-atmosphere furnaces to 3,000 °C for superalloys, hard metals, graphite purification and advanced ceramics.

4 structures →

Illustrative product concept of a closed-loop furnace cooling skid and hydraulic power unit

Illustrative product direction; final configuration is confirmed against the project brief.

Auxiliary Equipment & Spares

The supporting equipment and consumables that decide furnace uptime — cooling towers, hydraulic stations, water-cooled cables, capacitors and refractory linings.

4 structures →

Melting Furnaces

Coreless induction melting furnaces for steel, iron, copper and aluminium — steel-shell, aluminium-shell and dual-track, with hydraulic 95° tilting.

View category →

FL-GW-SS

Steel Shell Induction Melting Furnace

Fully welded steel-shell furnace with magnetic yoke and hydraulic 95° tilting, from 0.5 to 5 tons per body — the standard choice for continuous foundry melting.

Read More →
Studio product visualization of a steel-shell induction melting furnace and power cabinet

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GW-AS

Aluminium Shell Induction Melting Furnace

Lightweight aluminium-frame furnace for small and medium foundries — lower installed cost, faster relining, ideal below 3 tons.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GW-DT

Dual-Track Melting Furnace System

Two furnace bodies sharing a single medium frequency power supply, switched from one console so melting never stops for a lining change.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GWL

Aluminium Melting & Holding Furnace

Low-frequency induction furnace tuned for aluminium and its alloys, with gentle stirring, low burn-off and a holding mode for die-casting lines.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GWT

Copper & Brass Melting Furnace

Medium frequency furnace for copper, brass and bronze with zinc-vapour extraction and tilting pour, sized 100 kg to 10 tons.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-CRU

Crucible Electric Furnace

Resistance-heated pot furnace in 1,000 °C and 1,200 °C ratings — for element analysis, assay, small-batch metal melting and heat treatment of small steel parts.

Read More →
Representative precision induction coil manufacturing configuration

Illustrative product concept; final configuration is confirmed during engineering review.

FL-HQ

Laboratory & Precision Casting Furnace

Bench and floor-standing furnaces from 1 kg to 100 kg with fast heat-up and tight temperature control, for R&D, dental, jewellery and investment casting.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

Medium Frequency Power Supplies

KGPS thyristor parallel-resonance and IGBT series-resonance inverters from 100 kW to 2,500 kW, with constant-power tracking and full protection. Larger ratings built to order.

View category →

FL-KGPS

KGPS Thyristor Power Supply

Rugged SCR parallel-resonance inverter, 100–2,500 kW, built for continuous foundry melting and tolerant of weak or noisy grids. Larger ratings built to order.

Read More →
Illustrative product concept of a medium-frequency induction power supply cabinet

Illustrative product concept; final configuration is confirmed during engineering review.

FL-IGBT

IGBT Series Resonance Power Supply

Solid-state IGBT inverter with high power factor across the load range, low harmonics and fine control — for heating lines and modern melting shops.

Read More →
Illustrative product concept of a medium-frequency induction power supply cabinet

Illustrative product concept; final configuration is confirmed during engineering review.

FL-PS-1D2

One-Drive-Two Power Supply

A single inverter feeding two furnace bodies or two heating stations through an interlocked switching cabinet — melt on one, reline the other.

Read More →
Illustrative product concept of a medium-frequency induction power supply cabinet

Illustrative product concept; final configuration is confirmed during engineering review.

Induction Heating Systems

Through-heating and surface-hardening lines for billets, bars, tubes and finished parts, with closed-loop temperature control and automatic handling.

View category →

FL-IH-BIL

GTR Billet Induction Heating Furnace

GTR series through-heating line for round and square billets, with pyrometer control, hot and cold reject gates and press synchronisation.

Read More →
Induction billet heating line with steel bars moving through a guarded coil station

Illustrative product concept; final configuration is confirmed during engineering review.

FL-IH-END

Bar End Heating Machine

Heats only the section to be formed — hand tools, axles, anchor bolts and eye bolts — cutting energy per part sharply versus full-length heating.

Read More →
Illustrative product concept of an automated billet induction heating line

Illustrative product concept; final configuration is confirmed during engineering review.

FL-IH-PIP

Pipe & Plate Heating Line

In-line heating for pipe coating, bending, normalising and plate hot-forming, with continuous throughput and zone temperature control.

Read More →
Illustrative product concept of an automated billet induction heating line

Illustrative product concept; final configuration is confirmed during engineering review.

Induction Heat Treatment Systems

CNC induction hardening cells and continuous quenching and tempering lines, configured around the component, steel grade, treatment zones and production flow.

View category →

FL-IH-HRD

Induction Hardening Machine

CNC induction hardening configurations for shafts, gears, rails and other steel parts, engineered around part geometry, alloy, target case depth and line requirements.

Read More →
Illustrative product concept of a CNC induction hardening cell with a shaft, gear, induction coil and quench station

Illustrative product concept; final configuration is confirmed during engineering review.

FL-IH-QT

Induction Quenching & Tempering Line

In-line hardening plus tempering in a single continuous pass — for steel strand, PC bar, drill rod, grinding rod and tube, with per-zone temperature control.

Read More →
Continuous induction quenching, controlled water spray and tempering line for steel bar and strand

Illustrative product concept; final configuration is confirmed during engineering review.

Vacuum Furnaces

Vacuum and controlled-atmosphere furnaces to 3,000 °C for superalloys, hard metals, graphite purification and advanced ceramics.

View category →

FL-VIM

Vacuum Induction Melting Furnace

Melting and casting under vacuum or inert atmosphere from 5 kg to 2 tons, for nickel superalloys, titanium alloys, magnetic alloys and clean specialty steels.

Read More →
Representative induction furnace copper coil manufacturing configuration

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VSF

Vacuum Sintering Furnace

Programmable vacuum and partial-pressure sintering to 2,200 °C with a uniform hot zone, for tungsten carbide, ceramics and PM components.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VHP

Vacuum Hot Press Sintering Furnace

Simultaneous heat and uniaxial pressure to 2,300 °C and 500 kN, producing near-full-density parts from materials that will not densify by sintering alone.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GPF

Graphite Purification Furnace

Vacuum high-temperature furnace that purifies graphite powder, electrodes and shaped products by volatilising metallic impurities.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

Auxiliary Equipment & Spares

The supporting equipment and consumables that decide furnace uptime — cooling towers, hydraulic stations, water-cooled cables, capacitors and refractory linings.

View category →

FL-AUX-COOL

Closed-Loop Cooling System

Two-circuit cooling with a plate heat exchanger, deionised internal loop and evaporative or dry cooling tower — the single most important accessory for furnace life.

Read More →
Illustrative product concept of a closed-loop furnace cooling skid and hydraulic power unit

Illustrative product concept; final configuration is confirmed during engineering review.

FL-AUX-HYD

Hydraulic Tilting Station

Twin-cylinder hydraulic tilting with proportional speed control, mechanical safety lock and emergency hand pump for controlled pouring at any capacity.

Read More →
Illustrative product concept of a closed-loop furnace cooling skid and hydraulic power unit

Illustrative product concept; final configuration is confirmed during engineering review.

FL-AUX-CAB

Water-Cooled Cables & Capacitors

Flexible water-cooled cables, electrothermal resonant capacitors, thyristor and IGBT modules, fuses and control boards, referenced to your machine serial number.

Read More →
Illustrative product concept of a closed-loop furnace cooling skid and hydraulic power unit

Illustrative product concept; final configuration is confirmed during engineering review.

FL-AUX-REF

Furnace Lining Refractory

Furnace-lining material and installation-tooling options reviewed against furnace design, alloy, slag practice and operating conditions.

Read More →
Illustrative product concept of an induction furnace refractory lining, steel former and ramming materials

Illustrative product concept; final configuration is confirmed during engineering review.

Tell us what your process needs.

Share the material or part, target output or treatment result, operating schedule and site utilities. Our engineers can review the equipment configuration and quotation scope against your application.