Skip to content
Representative induction furnace copper coil manufacturing configuration

Illustrative product concept; final configuration and specifications are confirmed during engineering review.

Material & process

Share the workpiece alloy, dimensions and target process so the equipment route can be reviewed.

Output & duty

Define batch or throughput needs, operating schedule and required temperature or treatment result.

Site & utilities

Confirm available power, cooling, layout and destination-market requirements before final specification.

Vacuum Furnaces · FL-VIM

Vacuum Induction Melting Furnace (VIM) for Superalloys and Specialty Steels

Melting and casting under vacuum or inert atmosphere from 5 kg to 2 tons, for nickel superalloys, titanium alloys, magnetic alloys and clean specialty steels.

  • Degasses hydrogen, nitrogen and oxygen from the melt
  • Reactive elements survive — high recovery of Al, Ti and rare earths
  • Vacuum lock charging and mould chamber — multiple heats per pump-down
  • Programmable multi-segment temperature and pressure recipes
  • Full batch data logging for aerospace traceability
Capacity
5 kg – 2 t
Max temperature
1,750 °C
Ultimate vacuum
6.7 × 10⁻³ Pa (cold, clean, empty)
Working vacuum
10⁻¹ – 10⁻² Pa
Leak rate
≤ 0.5 Pa·L/s
Pumping set
Mechanical + roots + diffusion or turbo
Atmosphere
Vacuum, argon or nitrogen backfill
Charging
Vacuum lock hopper, no vacuum break between heats

Product Details

Vacuum induction melting is specified when the alloy contains elements that oxidise readily — aluminium, titanium, rare earths — or when dissolved hydrogen, nitrogen and oxygen must be driven out of the melt. Under high vacuum these gases evolve from the bath and are pumped away, and the resulting ingot is measurably cleaner on inclusion count.

The furnace comprises a water-cooled vacuum chamber, an induction coil and crucible, a tilting pour mechanism, a mould chamber with an isolation valve for charging without breaking vacuum, and a pumping set of mechanical, roots and diffusion or turbo pumps sized to your cycle.

Typical users are aerospace and gas turbine alloy producers, magnetic and precision alloy makers, and specialty steel plants producing bearing and tool steel to tight cleanliness specifications.

FL-VSF

Vacuum Sintering Furnace

Programmable vacuum and partial-pressure sintering to 2,200 °C with a uniform hot zone, for tungsten carbide, ceramics and PM components.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VHP

Vacuum Hot Press Sintering Furnace

Simultaneous heat and uniaxial pressure to 2,300 °C and 500 kN, producing near-full-density parts from materials that will not densify by sintering alone.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GPF

Graphite Purification Furnace

Vacuum high-temperature furnace that purifies graphite powder, electrodes and shaped products by volatilising metallic impurities.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

Tell us what your process needs.

Share the material or part, target output or treatment result, operating schedule and site utilities. Our engineers can review the equipment configuration and quotation scope against your application.