Skip to content

Products

Induction Melting Furnaces & Crucible Furnaces, 50 kg to 5 Tons

Coreless induction melting furnaces for steel, iron, copper and aluminium — steel-shell, aluminium-shell and dual-track, with hydraulic 95° tilting.

A coreless medium frequency induction furnace melts charge by inducing eddy currents directly in the metal, which is why it reaches tapping temperature faster and with less oxidation loss than a fuel-fired furnace. Our standard range runs from 50 kg vacuum and crucible units up to 5-ton steel-shell bodies in a dual-track arrangement; larger capacities are built to order.

Every furnace ships as a complete melting system: furnace body, coil, medium frequency power supply, capacitor bank, water-cooled cables, hydraulic tilting station, closed-loop cooling and the operator console. That matters for an import — one supplier, one packing list, one commissioning team, and no interface disputes between separately-sourced components.

Coils are wound from oxygen-free rectangular copper tube with class-H insulation and a magnetic yoke on furnaces above 1 ton. Steel-shell designs use a fully welded frame with the yoke carrying the magnetic return path, giving longer lining life and lower coil loss on the larger sizes.

Alongside the induction range we build resistance-heated crucible furnaces for laboratory melting, assay and small-part heat treatment. They are a different technology for a different job — small batches, tight temperature control, no water cooling — and the product page says so plainly rather than selling them as induction equipment.

Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product direction; exact configuration is confirmed during engineering review.

Melting Furnaces Range

Every machine below is built to your duty. Click through for model tables, full specifications, materials handled and lead times.

FL-GW-SS

Steel Shell Induction Melting Furnace

Fully welded steel-shell furnace with magnetic yoke and hydraulic 95° tilting, from 0.5 to 5 tons per body — the standard choice for continuous foundry melting.

Read More →
Studio product visualization of a steel-shell induction melting furnace and power cabinet

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GW-AS

Aluminium Shell Induction Melting Furnace

Lightweight aluminium-frame furnace for small and medium foundries — lower installed cost, faster relining, ideal below 3 tons.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GW-DT

Dual-Track Melting Furnace System

Two furnace bodies sharing a single medium frequency power supply, switched from one console so melting never stops for a lining change.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GWL

Aluminium Melting & Holding Furnace

Low-frequency induction furnace tuned for aluminium and its alloys, with gentle stirring, low burn-off and a holding mode for die-casting lines.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GWT

Copper & Brass Melting Furnace

Medium frequency furnace for copper, brass and bronze with zinc-vapour extraction and tilting pour, sized 100 kg to 10 tons.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

FL-CRU

Crucible Electric Furnace

Resistance-heated pot furnace in 1,000 °C and 1,200 °C ratings — for element analysis, assay, small-batch metal melting and heat treatment of small steel parts.

Read More →
Representative precision induction coil manufacturing configuration

Illustrative product concept; final configuration is confirmed during engineering review.

FL-HQ

Laboratory & Precision Casting Furnace

Bench and floor-standing furnaces from 1 kg to 100 kg with fast heat-up and tight temperature control, for R&D, dental, jewellery and investment casting.

Read More →
Illustrative product concept of a steel-shell induction melting furnace in a foundry setting

Illustrative product concept; final configuration is confirmed during engineering review.

Tell us what your process needs.

Share the material or part, target output or treatment result, operating schedule and site utilities. Our engineers can review the equipment configuration and quotation scope against your application.