Skip to content
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration and specifications are confirmed during engineering review.

Material & process

Share the workpiece alloy, dimensions and target process so the equipment route can be reviewed.

Output & duty

Define batch or throughput needs, operating schedule and required temperature or treatment result.

Site & utilities

Confirm available power, cooling, layout and destination-market requirements before final specification.

Vacuum Furnaces · FL-GPF

High Temperature Graphite Purification Furnace to 3,000 °C

Vacuum high-temperature furnace that purifies graphite powder, electrodes and shaped products by volatilising metallic impurities.

  • High carbon purity without wet chemical processing
  • Suitable for powder, blocks, electrodes and shaped products
  • Optional halogen injection for high-silicon feedstock
  • Condensing trap and scrubber on the exhaust
  • Programmable multi-day cycles with unattended operation
Max temperature
3,000 °C
Working temperature
2,400 – 2,900 °C typical
Purity achieved
Up to 99.99% carbon, feedstock dependent
Working volume
0.1 – 10 m³
Atmosphere
Vacuum, argon, optional halogen injection
Heating
Graphite resistance or induction
Cycle time
24 – 72 hours depending on charge and purity target
Exhaust
Condensing trap plus scrubber

Product Details

Above roughly 2,400 °C the metallic impurities in graphite — iron, silicon, aluminium, calcium and their compounds — volatilise and are pumped away, leaving carbon behind. Held at 2,800–3,000 °C the process reaches very high carbon purity without the chlorine or halogen chemistry used in wet purification routes.

The furnace is used for battery anode graphite, isostatic graphite blocks, EDM electrodes, crucibles and carbon-carbon composite preforms. Charge is loaded in graphite trays or as whole blocks depending on the product.

Halogen gas injection can be added to lower the required temperature and shorten the cycle where the feedstock has high silicon content. Exhaust passes through a condensing trap and a scrubber before venting.

FL-VIM

Vacuum Induction Melting Furnace

Melting and casting under vacuum or inert atmosphere from 5 kg to 2 tons, for nickel superalloys, titanium alloys, magnetic alloys and clean specialty steels.

Read More →
Representative induction furnace copper coil manufacturing configuration

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VSF

Vacuum Sintering Furnace

Programmable vacuum and partial-pressure sintering to 2,200 °C with a uniform hot zone, for tungsten carbide, ceramics and PM components.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VHP

Vacuum Hot Press Sintering Furnace

Simultaneous heat and uniaxial pressure to 2,300 °C and 500 kN, producing near-full-density parts from materials that will not densify by sintering alone.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

Tell us what your process needs.

Share the material or part, target output or treatment result, operating schedule and site utilities. Our engineers can review the equipment configuration and quotation scope against your application.