Skip to content
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration and specifications are confirmed during engineering review.

Material & process

Share the workpiece alloy, dimensions and target process so the equipment route can be reviewed.

Output & duty

Define batch or throughput needs, operating schedule and required temperature or treatment result.

Site & utilities

Confirm available power, cooling, layout and destination-market requirements before final specification.

Vacuum Furnaces · FL-VSF

Vacuum Sintering Furnace for Hard Metals, Ceramics and Powder Metallurgy

Programmable vacuum and partial-pressure sintering to 2,200 °C with a uniform hot zone, for tungsten carbide, ceramics and PM components.

  • ±5 °C uniformity across the full working volume
  • Clean binder removal with a dedicated de-waxing stage and trap
  • Partial-pressure argon control through the sintering stage
  • Optional sinter-HIP to 6 MPa in the same cycle
  • Recipe storage by part number with per-batch logging
Working volume
100 × 100 × 150 mm to 900 × 900 × 1,500 mm
Max temperature
2,200 °C
Temperature uniformity
±5 °C across the working zone
Ultimate vacuum
5 × 10⁻³ Pa
Partial pressure
Argon or nitrogen, 100 Pa – 0.1 MPa
Sinter-HIP option
Up to 6 MPa over-pressure
Hot zone
Graphite element and felt insulation
Control
Multi-segment recipe, per-batch data logging

Product Details

Sintering under vacuum removes the binder cleanly and eliminates the residual porosity that traps gas in an atmosphere furnace. For cemented carbide the result is a denser part with fewer pore defects; for technical ceramics it is a controlled grain structure at a repeatable density.

The hot zone is graphite felt insulated with graphite heating elements, giving ±5 °C uniformity across the working volume. Partial-pressure argon can be admitted during the binder removal and sintering stages, and an over-pressure sinter-HIP option consolidates the last percent of porosity in the same cycle.

Recipes are multi-segment with independent temperature, ramp rate, dwell and pressure per segment, stored by part number and logged per batch.

FL-VIM

Vacuum Induction Melting Furnace

Melting and casting under vacuum or inert atmosphere from 5 kg to 2 tons, for nickel superalloys, titanium alloys, magnetic alloys and clean specialty steels.

Read More →
Representative induction furnace copper coil manufacturing configuration

Illustrative product concept; final configuration is confirmed during engineering review.

FL-VHP

Vacuum Hot Press Sintering Furnace

Simultaneous heat and uniaxial pressure to 2,300 °C and 500 kN, producing near-full-density parts from materials that will not densify by sintering alone.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

FL-GPF

Graphite Purification Furnace

Vacuum high-temperature furnace that purifies graphite powder, electrodes and shaped products by volatilising metallic impurities.

Read More →
Illustrative product concept of a horizontal vacuum furnace with a separate pumping cart

Illustrative product concept; final configuration is confirmed during engineering review.

Tell us what your process needs.

Share the material or part, target output or treatment result, operating schedule and site utilities. Our engineers can review the equipment configuration and quotation scope against your application.